GET A QUOTE

Construction Site Signs Houston Contractors Need

A Houston job site needs four kinds of sign: safety signs at the gate, site identification, directional signs for deliveries, and equipment decals. What they get printed on is settled by one number: coroplast lasts approximately 3 to 6 months outdoors, and most commercial builds run longer than that.

That is the whole decision in a sentence. If the sign has to survive the job, match the material to the schedule first and the price second, because the cheap panel bought three times is no longer the cheap panel. Houston Sign Company lists construction and manufacturing as one of the industries it serves, with safety signs, site signage and equipment decals named on its own page.

Multi-message site safety sign fixed to a construction site perimeter fence

Pick the Material by How Long the Job Runs

Use the first column, not the last one. Sizes below are the two most ordered for site work, printed on one side, priced per sign in a run of ten.

How long the sign stays up Material Why it fits 18 x 24 in., run of 10 24 x 36 in., run of 10
Up to 3 to 6 months Coroplast Corrugated plastic, semi-rigid, light enough to zip-tie. The only material here with a published outdoor term: approximately 3 to 6 months. $5.83 $10.68
6 months to several years, flat panel .040 aluminum Rigid metal sheet. The default for anything bolted down and left alone through a Houston summer. $26.81 $56.65
Several years, larger panel that must stay flat 3MM ACM (aluminum composite) Aluminum skins over a polyethylene core. Holds its shape at sizes where sheet aluminum starts to flex. $35.00 $61.51
Indoors or under cover only 3MM PVC Very rigid, which also means it can break in high wind, and it does not perform well under extremely high temperatures. Keep it inside the trailer or the finished building. $43.69 $76.74
Post-mounted site boards MDO plywood The traditional builder board, printed to order. Quoted on the job rather than sold in the online store. Quoted Quoted

Source: Houston Sign Company online store pricing, single sided, price per sign in a quantity of ten, checked 20 November 2026. MDO is quoted and is not in the store. Confirm at checkout.

Two rows deserve a second look. PVC is the most expensive of the four priced materials at both sizes and it is the one least suited to an open lot, so paying more buys you less here, not more. And coroplast is the only line in the table with a lifespan printed next to it. Everything else is quoted against exposure, which is the honest answer: a shop that gives you a confident number of years for a printed panel without asking where it is going is guessing.

The Reprint Math Nobody Runs Before Ordering

At 18 by 24 inches in a run of ten, a .040 aluminum sign costs $26.81 and a coroplast sign costs $5.83. Aluminum is about four and a half times the price, so the comparison is not aluminum against coroplast. It is aluminum against coroplast reprinted however many times the schedule demands.

Run it out. If your coroplast gets the short end of its range and you replace it every three months, you pass the cost of the aluminum panel somewhere around month fourteen. If it gets the full six months, the crossover sits near month twenty seven. A nine month interior fit-out is comfortably coroplast territory. A two year ground-up build is not, and the gate signs on that job should have been aluminum on day one.

Quantity changes the answer too, but not the way most buyers expect.

18 x 24 in., 1 side 1 sign 10 signs, each 50 signs, each Drop across the range
Coroplast $20.55 $5.83 $4.05 80%
.040 aluminum $59.92 $26.81 $22.84 62%
3MM ACM $120.78 $35.00 $24.42 80%
3MM PVC $104.49 $43.69 $26.07 75%

Source: Houston Sign Company online store pricing, 18 x 24 inches, single sided, price per sign, checked 20 November 2026.

The break is steep on small panels and shallow on big ones. A 24 by 36 inch aluminum sign falls only from $77.05 to $52.29 between one and fifty, about 32 percent, while the same size in coroplast falls from $42.72 to $8.85, about 79 percent. Ordering spare large aluminum panels up front therefore saves far less than ordering spare coroplast up front. If you want a hedge against a damaged sign, hedge on the cheap material and reorder the expensive one when you actually need it.

Danger, construction area, do not enter sign zip-tied to a site fence with an excavator behind it

What Actually Goes Up on a Site

Most contractors order the same short list, and it is worth ordering it as one set rather than in three phone calls.

  • Safety signs at every entrance. Hard hat, high visibility, authorized personnel, speed limit. Houston Sign Company makes safety signs for job sites, plants and warehouses, so the same set works for an operating facility as for a build.
  • Site identification. The general contractor, the owner, the architect and the trades on one board. This is the panel that stays up longest, so it is the one that justifies aluminum or MDO.
  • Directional signs. Deliveries, office, parking, gate numbers. Drivers who cannot find the gate idle on the street, and in a tight infill lot that is a neighbour complaint waiting to happen.
  • Equipment decals. Printed vinyl for plant, containers and site boxes, so your gear comes home at the end of the job.
  • Builder signs on posts. Set on 4 x 4 posts by the company’s own installation crew, the same way its real estate signs go in.

For large temporary graphics in an exposed position, mesh banner material is also printed. Mesh is the material Houston Sign Company names for outdoor installations that need air to pass through rather than push against a solid face.

Proofs, Lead Time and Installation

Everything is proofed before it prints, which on a site set matters more than usual: one wrong gate number or one trade name misspelled on the identification board gets reprinted at your cost if it is approved wrong. Decals average 3 to 5 business days, and rush options are available when a schedule moves. Design is in-house, so a set can be drawn from a logo sheet rather than supplied print-ready.

Order sizes run from a single plot map to 5,000 corrugated plastic signs, which covers both ends of this work: one site board for one lot, or a full run of lot markers for a subdivision. Installation is in-house as well, and the company is insured for work in Houston and most surrounding communities, so the crew that sets your builder signs on 4 x 4 posts is the same one that printed them. Houston Sign Company has been at 5801 Chimney Rock Road since 1946 and is a Better Business Bureau Accredited Business, which you can check before you open an account. More of the range is on the Houston Sign Company site, and when the building is finished the interior signs for the completed space are a separate conversation to start early, because dimensional lobby and metal signs typically take seven to ten business days.

Construction Site Signs: Frequently Asked Questions

How long do construction site signs last in Houston?

It depends entirely on the material. Coroplast is rated at approximately 3 to 6 months outdoors, which is the only published term on the list. Aluminum, aluminum composite and MDO are quoted against the exposure at your specific site rather than sold with a lifespan, so give the shop the location and the orientation when you ask.

Can I use coroplast for a two year build?

You can, but budget for replacing it. At 18 by 24 inches in a run of ten you are comparing $5.83 per coroplast sign against $26.81 for the same sign in .040 aluminum, so four or five reprints wipe out the saving. For anything at the gate on a long job, buy the metal once.

What size should a site safety sign be?

18 by 24 inches is the common size for individual safety and directional signs, and 24 by 36 inches for a combined site board that carries several messages at once. Both sizes are priced in the online store in coroplast, aluminum, aluminum composite and PVC.

Do you install the signs, or do we?

Both are possible. Houston Sign Company has its own installation crew and sets real estate and builder signs on 4 x 4 posts, and it is insured for work in Houston and most surrounding communities. If your own crew is mounting them, say so at the quote stage so the panels are drilled for the hardware you are using.

How many signs should I order at once?

Order the small panels in a batch and the large ones to need. The per-sign price on an 18 by 24 inch coroplast sign falls 80 percent between one and fifty, while a 24 by 36 inch aluminum panel falls only about 32 percent, so the batch saving is real on the cheap material and modest on the expensive one.

If you are comparing shops rather than materials, the questions in how to choose a sign company in Houston cover what to check before you place the order. To price a specific set for your site, request a quote or call 713-662-3123, Monday through Friday, 8:30 a.m. to 5 p.m.

Request A Quote For Signage & Graphics Today!