GET A QUOTE

ADA Restroom Signs: What Texas Businesses Need on the Wall

A restroom sign in a Texas commercial building has to carry four things: raised characters, Grade 2 braille directly below those characters, a non-glare finish, and enough contrast between the characters and the background to read at a glance. It then has to be mounted in a band between 48 and 60 inches above the floor, measured at the characters rather than at the edge of the sign, on the wall at the latch side of the door.

Those are the figures Houston Sign Company publishes on its own page for ADA-compliant braille signs for bathrooms and office walls, and they follow the ADA Standards for Accessible Design. Treat every dimension in this post as the number to confirm for your building rather than a number to design to from a blog post. The edition of the standard in force on your project is what a plan reviewer measures against, and Texas administers its own Texas Accessibility Standards alongside the federal rules.

ADA men's and women's restroom signs with pictograms, the accessibility symbol, raised text and braille, made by Houston Sign Company

What Has to Be on a Restroom Sign, and What That Means When You Order

Most of the compliance argument happens in the artwork, before anything is printed or fabricated. This is the checklist a buyer actually has to make decisions against.

Requirement What it means when you order
Raised (tactile) characters Uppercase, in a sans serif face, raised off the face of the sign. The company’s ADA page puts the raise at a minimum of 1/32 inch and the character height between 5/8 inch and 2 inches. Your brand font usually cannot be used for this line, because script and decorative faces are out.
Grade 2 braille Contracted braille sits directly below the matching text. It is set as part of the sign artwork, not typed in a word processor and pasted on, so it is produced with the sign rather than added afterwards.
Pictogram or symbol Where the sign carries a symbol, the symbol gets its own field, which the company’s page puts at 6 inches, with a text description below it. The symbol never replaces the tactile text. Both go on the sign.
Contrast Characters and symbols must contrast with the background. Dark characters on a light panel or light characters on a dark panel both work. A mid tone logo color on a mid tone panel does not, which is the most common reason a brand-matched design has to be redrawn.
Finish Non-glare, such as matte or eggshell, on both the background and the characters. A gloss face fails this, which is the detail most often missed when artwork is reused from a decorative sign.
Mounting height Between 48 and 60 inches above the finished floor, measured at the characters.
Mounting position On the wall at the latch side of the door, outside the arc of a door that swings out, with clear floor space in front of the sign so someone can stand and read it.

The Height Band Is Measured at the Text, Not at the Sign

This is the detail that catches installers, and it is worth getting right before anyone puts a hole in the wall. The 48 inch minimum and the 60 inch maximum apply to the raised characters: the lowest tactile character sits at or above 48 inches, and the highest sits at or below 60 inches. The sign itself can sit anywhere that puts the text inside that band.

The practical consequence is that two signs of different heights do not hang with their top edges level. A tall sign with a pictogram across the top and a line of text near the bottom sits lower on the wall than a small text-only plate, because the text is the thing being positioned. A corridor of signs that looks perfectly aligned on a drawing can end up with half its characters outside the band once it is installed. Measure to the text, every time.

Where the Sign Goes When the Wall Is Not Cooperating

The default is the wall on the latch side of a single door, at roughly eye level for a standing adult. Real buildings complicate that, and Houston Sign Company’s ADA page sets out the usual alternatives.

  • No wall on the latch side. Where a restroom sits tight into a corner or against a return wall and there is no room on the latch side, the sign moves to the nearest adjacent wall.
  • Double doors. Where one leaf does not open, the sign can go on the inactive leaf. Where both open, it goes on the wall to the right of the right-hand door.
  • Doors that swing out. The sign goes outside the arc of the swing, so the door cannot hit somebody standing and reading it.
  • Doors that swing in. A sign can go on the door itself only where the door closes automatically, and only on the push side.

Walk the corridor before you order. It is cheaper to find the corner restroom with no latch-side wall at the quoting stage than after a box of signs has been made.

Who Decides Whether It Is Compliant

Houston Sign Company makes and installs signage. Which standard and which edition applies to your building, and whether your project goes through a state accessibility review, are questions for your architect, your general contractor or the plan reviewer on the job, not for a sign shop. The sensible order of work is to have the responsible party sign off on the sign schedule and the artwork, then have the signs produced to that approved drawing. The company proofs every job before printing, so the approved drawing and the thing that gets made are the same document.

Ordering Restroom Signs in Houston

ADA and braille signage is quoted rather than priced off a size chart, because the character count, the symbol, the colors and the quantity all move the number. There is no published price for it, so expect a quote rather than a shelf price.

A few things make the quote faster. Send a room-by-room list with the exact wording for each sign, note which rooms have the latch-side problem described above, and say whether you want the signs delivered or installed. Houston Sign Company has in-house designers, so supplying a brand color and a logo is enough to start the artwork, and its published order range runs from a single plot map up to 5,000 corrugated plastic signs, which means a single replacement plate is as normal an order as a full building’s worth. Rush options are available, so ask about timing while you are getting the quote rather than afterwards.

The shop sits at 5801 Chimney Rock Road, between the Galleria and the City of Bellaire, and the company runs its own installation crew and is insured for work in Houston and most surrounding communities. Restroom signs are one piece of a building’s interior package, and suite numbers, directories and wayfinding usually get ordered at the same time: the full range is on the interior signs in Houston page, and the rest of what the shop makes is on the Houston Sign Company home page. If you are still deciding who to put the job with, the guide to choosing a sign company in Houston covers what to check before you order.

Blue and white ADA women's restroom sign with a raised pictogram, raised text and braille below

ADA Restroom Signs: Frequently Asked Questions

Does a restroom sign need braille, or is the symbol enough?

The symbol is not enough on its own. An identification sign carries raised characters with Grade 2 braille below them, and where a symbol is used it sits in its own field with a text description beneath it.

How high should a restroom sign be mounted?

In a band between 48 and 60 inches above the finished floor, measured at the raised characters rather than at the top or bottom edge of the sign. Confirm the exact figures against the standard in force on your project.

Can the sign match our brand colors?

Usually yes, as long as the characters and symbols contrast strongly with the background and the finish stays non-glare. Light characters on a dark panel and dark characters on a light panel both satisfy that. Two similar mid tones do not, and a gloss face is out.

Can I order one sign, or is there a minimum?

One is fine. Houston Sign Company’s published order range starts at a single sign, so replacing one damaged restroom plate is a normal order.

Do you handle the compliance approval for the building?

No. Houston Sign Company makes and installs the signs. The accessibility review for the building belongs to the design and construction team, and the signs should be made to a sign schedule that team has approved.

To price a restroom sign package for your building, request a quote from Houston Sign Company or call 713-662-3123, Monday through Friday from 8:30 a.m. to 5 p.m.

Request A Quote For Signage & Graphics Today!